test method
For flash point determinations of fuels, lubricating oils, liquids containing suspended solids and liquids that tend to form a surface film during testing.
pensky-martens closed cup flash tester
- Conforms to ASTM D93 and related specifications
- Choice of electric or gas heating
Determines flash points of a wide range of products by a closed cup method with two option speed stirring of the sample. Extensively used in shipping and safety regulations for detection of contamination by volatile and flammable materials in fuel oils and lubricating oils, and for characterization of hazardous waste samples. Smooth operating cover mechanism slides shutter open and applies test flame at the turn of a knob. Cover fits over brass test cup and includes pilot flame, test flame reference bead, built-in stirrer and plated brass thermometer ferrule.
Electrically heated model is equipped with a 1000W nickel-
chromium heater with stepless variable control for accurate, repeatable temperature rate of rise settings per specifications. Heater unit is enclosed in a stainless steel housing with cooling vents. Includes line cord receptacle and switch for accessory slow speed stirrer.
Gas heated model has a built-in nickel plated brass natural gas burner, or can be supplied with an artificial gas burner or liquid propane burner (specify when ordering). Both models are mounted on a sturdy cast iron base.
ordering information
| catalog no. | description | qty |
| K16203 | Electrically Heated Model, 115V 60Hz | |
| K16273 | Electrically Heated Model, 220-240V 50/60Hz | |
| K16000 | Gas Heated Model |
accessories
K16225 Stirrer Motor, 115V 60Hz 1
Slow speed gear motor rotates stirrer of
Pensky-Martens Tester at 115rpm for Procedure A and at 250rpm for Procedure B. Includes adjustable support bracket and mounting rod.
250-000-09F ASTM 9F Thermometer Range: 20 to 230˚F
250-000-09C ASTM 9C Thermometer Range: –5 to +110˚C 1
250-000-10F ASTM 10F Thermometer Range: 200 to 700˚F
250-000-10C ASTM 10C Thermometer Range: 90 to 370˚C 1
K16010 Cover Assembly
Complete assembly. Includes shutter, flame exposure device, stirrer and thermometer ferrule.
K16020 Brass Test Cup With heat resistant handle.
K16020-NI Nickel Plated Test Cup With heat resistant handle
specifications
Conforms to the specifications of:
ASTM D93; AASHTO T73-811; IP 34; ISO 2719; DIN 51758; FTM 791-1102; NF M 07-019
Included Accessories Brass Test Cup with Handle Thermometer Holder
Cover Assembly Specifications
Electrical Requirements
115V 60Hz, Single Phase, 6.5A
220-240V 50/60Hz, Single Phase, 3.4A
Dimensions lxwxh,in.(cm)
9.5 x8x22.5 (24x20x57)
with optional stirrer motor installed Net Weight:
K16000: 21 lbs (9.5kg) K16203/K16273: 24 lbs (10.9kg)
Shipping Information
Shipping Weight: 30 lbs (13.6kg)
Dimensions: 3.1 Cu. ft.
Reviews
There are no reviews yet.